(Close This Window to Return to Previous Page.)

A   B   C   D   E   F   G   H   I   J   K   L   M
N   O   P   Q   R   S   T   U   V   W   XYZ

Authentics - True to the name, authentic wood with a clear finish for protection and natural beauty.

Braided Ladders - The braided ladders are what make a modern mini, micro, wood, or Poly blind unique. They are the skinny little strings that the slats of the blind are suspended upon and control their Tilt. Some 2" slatted blinds are available, for a surcharge, with decorative cloth tapes in place of the braided ladders.

Burled Woods - Replicating the old world charm and sophistication sought after by wood artisans.

Cloth Tape Ladders - Available in place of standard braided ladders.  Fashion solids available for all four wood families.  Decorative tapes available for 2" Premium Hardwood Blinds.  Blinds with cloth tapes will have traditional rout holes.

Back to Top

Color Matching - A color matching valance, wand and bottomrail, along with color-coordinated braided ladder and cord come standard with Levolor wood blinds.

Control Positions - Choice of control position is available.  Tilter left, left cord right is the standard position.  You may choose to reverse the standard position.  Grouped controls available on 2" and 1" Premium Hardwood Blinds.  See individual products specifications for limitations.

Back to Top

Cord Tilt Control - Available in place of standard wand tilt.

Cutouts - Allows access to air conditioners, window cranks, etc.  Center and side cutouts are available.  A diagram may be required.  (Not available online at this time.  To be added to options soon.)

Decorative Radius Corners - Slat ends are finished with rounded corners for a softer appearance.  Available on 2" and 1" Premium Wood Blinds only.

Back to Top

Extended Valance Option - May specify a valance greater than ordered headrail width.  Maximum total valance width is 96".  Valances greater than 96" will be spliced.  (Not available online at this time.  To be added to options shortly.)

Extension Brackets - Must be requested at time of order!  For installations requiring additional space between the blind and the mounting surface.

Headrail

Headrail Options: If you choose standard (default) then your blind will be made as one blind on one matching width headrail.  If you choose 2 on 1 or 3 on 1 your blind will be equally split into 2 or 3 blinds on one headrail.

For example, if you had an opening that measured 96’ wide and you wanted all of the slats to be continuous from left to right and all move up and down and tilt together then you would want a standard headrail.  If, however, you wanted to have three separate independently operated blinds all attached to the same 96” wide headrail, you would choose 3 on 1.  Or if you wanted two separate independently operated blinds on the 96” wide headrail then you would choose 2 on 1.

On some of our price grids there are shaded areas that indicate that you should order your blind as 2 on 1 or 3 on 1.  This is because some manufacturers will not warrant blinds that exceed a certain amount of total square footage.  They will only warrant the extra large blinds if they are manufactured as 2 on 1 or 3 on 1 blinds.

The price for the 2 on 1 or 3 on 1 headrail option is automatically added to the cost of the blind at the bottom of your check out page.

Note:  Not available on some products.  Check options for the product you wish to purchase.

High Gloss - The most popular finishes with a high lustre gloss that enhances the natural look of wood with brilliance.

Back to Top

Hold Down Brackets - Must be requested at time of order!  Hold-down brackets prevent blinds from swaying.  They can be sill mounted, face mounted or mounted inside the frame.  Recommended for doors and in windows subject to wind exposure.

Lift - This refers to all product's (except Vertical Blinds and Arches) control for raising or drawing the product up or into the open position (window uncovered).The "Lift" control can be positioned either on the left end or the right end of the headrail. Blinds under 12" wide will be "Tilt Only" (See "Tilt") and the "Tilt" control will be in the center of the headrail and have no "Lift" control .

LightMaster Privacy Feature - Edge rout design provides tighter closure to seal out light which creates darker rooms for increased privacy and security.  Slats can easily be removed for cleaning.  LightMaster is an option available on all Levolor 2" Premium Hardwood Blinds and Nu Wood Blinds.

Back to Top

Mount - Where the product is to be mounted in reference to the opening to be covered. Inside is inside the opening (i.e. window), outside is outside the opening. Please refer to Measuring Instructions diagrams for further help.

Multi-Color Striping - Striping allows you to add more color to the room decor as well as match geometric designs on walls.  Identify color positions of slats with a sketch.  Also, specify the color of components (consider "white" for ladder and cord for uniform appearance.)  Available on 2" and 1" Premium Woods only.  (Not available online at this time.  To be added to options soon.)

Sandblast - Carefully etched wood that enhances the natural grain of the wood for a soft, textured look.

Back to Top

Stains - A blend of new stains and timeless classics color matched to home decor.  A complete range from lighter tones that add a natural warmth, to deep stains that add richness and elegance.

Replacement Valance Option - May request a replacement valance or order an additional valance to coordinate valance profiles between rooms (e.g.  NuWood for kitchens with Premium Hardwood valance profile would match Premium Hardwood blinds in adjoining rooms).  Maximum total valance width is 96".  Valances greater than 96" will be spliced.  (Call for pricing.  1-800-880-0352)

Back to Top

Rustic - Expanded collection of colors emphasizing knots, deep grains and natural characteristics.

Tilt - This refers to any horizontal blind product's (Wood blinds, mini & micro blinds, etc.) control for adjusting the rotation of the slats. The "Tilt" control can be positioned either on the left end or the right end of the headrail. The "Tilt" control can either be a twistable "Wand" or a string and tassel "Cord". "Cord" tilt is standard on all 2" slat blinds unless otherwise specified by you. 1" and 1/2" slat blinds are only available with "Wand" tilt. Blinds under 12" wide will be "Tilt Only" and the control will be in the center of the headrail and have no "Lift" control (See "Lift"). "Same Side" controls are not available with Poly-Wood blinds or any blind under 18" wide.

Two or More Blinds on One Headrail - Provides the flexibility of raising one blind while keeping the other lowered on extra wide windows, such as patio doors.  Two or more blinds on one headrail are available up to a total maximum width of 144".

Back to Top

Vintage Woods - Designs inspired by antique furniture, reflecting the passage of time.

Whites and washes - Wide selection of paints and washes, color matched to the most popular trim colors.  Color ranges from new, brighter whites, to warm shades of white, to new neutrals.

Back to Top